How to Fix a Bent Headphone Jack

Headphones are quite expensive, and getting a new pair of headphones just for the sake of a bent headphone jack is not a very wise idea.

A lot of people throw away their brand new headphones if their headphone jack is bent, as they don’t have the proper knowledge for fixing the bent headphones.

Thus, we have compiled this guide, in which we will show you step-by-step, how to fix a bent headphone jack easily.

That being said, let’s checkout the procedure right away.

Fixing Bent Headphone Jack

Bent headphone jack can cause a bunch of problems including weak sound, no sound, or sound trippin. If you are not in the mood to buy a new pair of headphones, you can follow this guide to fix the headphone jack at home.

There are two methods for fixing the headphone jack on your headphones. One method is to unbent the headphone jack, and the other one is to replace the entire headphone jack.

Unbenting the Headphone Jack

If your headphones are still in working position, and there is a very slight bent with sound breakage issues.

There is good news for you. You can easily unbent the headphone jack by using commonly available tools at home.

But, as with all the other repairing procedures, it comes with an associated risk of headphone damage. So, you have to work with that in mind.

Tools Required:

  • 2-Pliers

Here are the Steps for Fixing Bent Headphone Jack:

  • First of all, you need to hold the middle section of the headphone jack with the help of a plier.
  • Then, take the other plier, and make the headphone jack straighten.

Note: This step requires very gentle application, and any mistake can entirely ruin the whole headphone jack. So, you need to be very careful.

Related: Can headphones Dent Your Head

Replacing the Headphone Jack

If the above-mentioned method is not working for you, then replacing the whole headphone jack is the final resort you can try to fix the bent headphone jack.

However, replacing the headphone jack requires an intermediate level of soldering knowledge, and technical expertise. Moreover, you also need to buy a replacement jack for your headphones.

If properly done, your headphones should come back to life.

Things Required:

  • Replacement Jack
  • Soldering Iron
  • Soldering Wire
  • Wire Cutter

Here are the Steps for Replacing the Headphone Jack:

  • Firstly, you need to determine whether you have headphones with three wires or four wires, and get a replacement headphone jack accordingly.
  • Cut the headphone wire using the wire cutter or plier (you can also use scissors for this purpose).
  • Remove the insulation from the wires.
  • Now use the soldering iron and solder to rejoin the joints with the headphone jack.
  • Voila! You have successfully replaced the headphone jack of your headphone.

Frequently Asked Questions (FAQs)

Can We Fix the Bent Headphone Jack?

Yes, you can fix the bent headphone jack by using the above mentioned methods. We have added two different methods of fixing the bent headphone jacks.

Can Unbending Headphone Jack Fix Sound Issues?

Well, unbending the headphone jack can solve a bunch of different problems. So, if you are having sound issues on your headphones with bent jack, you can clear a majority of issues by straightening it.

Can We Replace the Headphone Jack?

Yes, we can replace the headphone jack on a majority of headphones. You need to cut, and solder the headphone jack on the headphones. Above, we have provided you with a complete step by step guide for replacing the headphone jack.


Fixing the bent headphone jack can save you the cost of a brand new pair of headphones. But, a lot of people think that fixing a bent headphone jack is a complete rocket-science, thus they do not even try to fix it.

Therefore, we have compiled this action-based guide, in which we have put together all the guidelines for getting the headphone back to life.

Leave a Comment